Configuring Cisco NX-OS Switches and Fabrics in the Data Center, Germany

We can host this training at your preferred location. Contact us!

The Configuring Cisco Nexus Switches (DCCNX) v1.0 course shows you how to install, configure, and manage Cisco Nexus Series Switch platforms using Cisco NX-OS to support highly available, secure, scalable virtualized data centers. Through expert instruction and hands-on practice, you will learn how to deploy Cisco NX-OS software features including networking, virtualization, security, storage services, system management and monitoring. You will also gain an introduction to automating Cisco Nexus devices using Cisco NX-OS Software programmability features. For technical overview the Cisco Nexus Switches, you may consider taking Introducing Cisco NX-OS Switches and Fabrics in the Data Center (DCINX) v1.0 along with this course.

To fully benefit from this course, you should have the following knowledge and skills:

Familiarity with Cisco data center technologies
Understand networking protocols, routing, and switching

These are the recommended Cisco courses that may help you meet these prerequisites:

Implementing and Administering Cisco Solutions (CCNA)
Introducing Cisco Data Center Networking (DCICN)
Introducing Cisco Data Center Technologies (DCICT)
Implementing Cisco Switched Networks (SWITCH)
Implementing Cisco IP Routing (ROUTE)

Describe the Cisco Nexus devices routing and forwarding
Decribe OTV
Describe and configure VXLAN
Describe Locator/D separation protocol
Describe the key features of Cisco Nexus devices
Describe Cisco Intelligent Traffic Director
Describe QoS on Cisco Nexus devices
Understand Cisco Nexus storage services
Configure device alliaces and zoning
Configure FCoE
Configuring NPIV and NPV Modes
Describe NX-API and network orchestration solutions and program Cisco NX-OS with Python
Explain system management, monitoring, and troubleshooting processes
Explain the troubleshooting processes

Describing the Cisco NX-OS Routing and Forwarding

Routing Overview
Multicast Routing
Cisco NX-OS Routing and Forwarding
Unicast and Multicast RIB and FIB

Describing Overlay Transport Virtualization

Cisco OTV Overview
Cisco OTV Control and Data Planes
Failure Isolation
Cisco OTV Features
Optimizing Cisco OTV

Describing Virtual Extensible LAN

VXLAN Benefits over VLAN
Layer 2 and Layer 3 VXLAN Overlay
VXLAN MP-BGP EVPN Control Plane
VXLAN Data Plane

Describing Locator/ID Separation Protocol

Locator/ID Separation Protocol
LISP VM Mobility
LISP ESM Multihop Mobility
LISP VPN Virtualization

Cisco Nexus Security Features

ACLs
Port Security
DCHP Snooping
Dynamic ARP Inspection
IP Source Guard
Unicast RPF
Traffic Storm Control
CoPP

Cisco Intelligent Traffic Director

Cisco ITD Overview
Cisco ITD Deployment Models
Cisco ITD Configuration and Verification

Describing QoS on Cisco Nexus Devices

QoS on Cisco Nexus Devices
Configure QoS on Nexus
Monitor QoS Statistics

Introducing Cisco Nexus Storage Services

Fibre Channel
Fibre Channel Flow Control
Fibre Channel Domain Initialization
Fibre Channel Addressing
FSPF Protocol

Configuring Device Aliases and Zoning

Distributed Device Alias Services Overview
Zoning Overview
Merge Zones Without Disruption
Recover from Zone Merge Failures
Enhanced Zoning

Configuring Fibre Channel Over Ethernet

Fibre Channel Over Ethernet
FCoE Requirements
Data Center Bridging
FCoE Addressing Scheme
FCoE Initialization Protocol
FCoE Port Types
Storage VDC

Configuring NPIV and NPV Modes

Cisco NPV Mode
N-Port ID Virtualization

Managing Automation and Programmability of Cisco Nexus Devices

Cisco NX-OS RESTful API
Network Orchestration
Programming Cisco NX-OS with Python

Configuring System Management and Monitoring

System Management Overview
System Monitoring Tools

Troubleshooting Cisco Nexus Switches

Cisco Nexus Troubleshooting Tools
Shell Access and Linux Containers
Memory and Packet Issues

Configuring Cisco NX-OS Switches and Fabrics in the Data Center Training Course in Germany

The Federal Republic of Germany is the second most populous country in Europe and is located in Central Europe. The official language of the country is German. Germany is one of the richest countries in the world. The main exports of the country include motor vehicles and iron and steel products.

Here are some fun facts about Germany:
The fairy tale writer, the Brothers Grimm, came from Germany and wrote many famous stories such as Cinderella, Snow White, and Sleeping Beauty.
Germany is home to the largest theme park in Europe, the Europa-Park.
The famous composer Ludwig van Beethoven was born in Germany.
The Autobahn, the German highway system, is known for having no general speed limit.

Berlin was divided by the Berlin Wall from 1961 to 1989. Known for its street art, Berlin has many colorful murals and graffiti throughout the city. Also, Berlin is home to many famous museums, such as the Pergamon Museum and the Museum Island. Many clubs and bars stay open until the early hours of the morning in this big city.

Another popular city is Munich, which is famous for its Oktoberfest beer festival that attracts millions of visitors every year. Munich is also home to many historic buildings, including Nymphenburg Palace and the Marienplatz town square.

The country's capital and largest city is Berlin, however Frankfurt is considered to be the business and financial center of Germany. It is home to the Frankfurt Stock Exchange, the European Central Bank, and many other financial institutions. Because of its central location within Europe and its status as a major financial hub, Frankfurt is often referred to as the "Mainhattan," a play on the city's name and its association with the Manhattan financial district in New York City.

Frankfurt is also a major transportation hub, with the largest airport in Germany and one of the largest in Europe, Frankfurt Airport. Additionally, it is a popular destination for tourists, with its historic city center, beautiful parks, and vibrant cultural scene.

Some of the top German technology companies like Siemens AG, Bosch, SAP SE, Deutsche Telekom, Daimler AG and Volkswagen has business centers in Frankfurt. The country has a strong tradition of engineering and innovation, and is home to many other world-class technology companies and research institutions.

Tailored to meet the specific needs of Germany, Bilginç IT Academy combines cutting-edge training methodologies with our comprehensive range of Certification Exam preparation courses and accredited corporate training programs. Experience a transformative approach to IT training that will redefine your expectations.

Configuring Cisco NX-OS Switches and Fabrics in the Data Center Training in Germany

Upcoming Trainings

Configuring Cisco NX-OS Switches and Fabrics in the Data Center Training in Germany

Prerequisites

What You Will Learn

Outline

Upcoming Trainings